I. Pre-Use Preparation
Confirm Application Scenarios
Suitable for oil absorption, equipment cleaning, and liquid spill handling (e.g., industrial machinery, automotive maintenance, kitchen grease, laboratory reagent spills).
Avoid use with strongly corrosive liquids (e.g., strong acids, alkalis) or in high-temperature environments (may affect adsorption performance or safety).
Wear Protective Gear (if necessary)
When handling hazardous chemical oils or highly concentrated grease, wear gloves and goggles to avoid direct skin or eye contact.
II. Standard Usage Steps
1. Direct Oil Absorption (for flat surfaces or equipment)
Dry Use:
Place the oil-absorbing cotton directly on the oil stain and press gently to leverage its pressure-point structure for enhanced adsorption. Let it sit for 10–30 seconds (adjust time based on oil volume).
For stubborn stains, fold the cotton and use the unused side to repeatedly press or wipe until the oil is fully absorbed.
Wet Use (with cleaning agents if needed):
Slightly moisten the cotton with water or a neutral cleaner (do not oversaturate; keep it semi-dry), then wipe the oily surface.
After cleaning, use a dry cloth or fresh oil-absorbing cotton to remove residual liquid and prevent water or detergent residue.
2. Handling Large Spills (e.g., floors, workbenches)
Lay the cotton flat or fold it into a pad, then place it over the spill area and press gently to ensure full contact with the liquid.
Once saturated (indicated by darker color and heavier texture), remove it with tweezers or gloves and discard it in a designated waste container (follow environmental regulations).
For severe spills, use multiple layers of cotton until the liquid is completely absorbed.
3. Cleaning Precision Equipment or Components
Tear off an appropriate size of cotton (avoid oversized pieces for easy handling) and gently wipe along the texture of the equipment or component contours.
For gaps or corners, fold the cotton into a pointed shape for deep cleaning (avoid excessive force to prevent equipment damage).
When cleaning electronic components or sensitive parts, ensure the cotton is dry and lint-free to avoid electrostatic or debris contamination.
III. FAQs
Q: Can it be reused?
A: The cotton is disposable. Its adsorption efficiency drops significantly after saturation, so single-use is recommended for optimal results.
Q: Is it suitable for water-based liquids?
A: The product is designed for oil-based substances (e.g., motor oil, cooking oil, chemical oils). It has limited water absorption and is not recommended for large water spills.